Indian Motorcycle Chief Dark Horse 2020, Руководство пользователя

Страница: 51 / 194

M MIISSFFIIRREE DDEETTEECCTTIIOONN
If a misfire is detected, the check engine indicator lamp will begin
to flash and fuel will be cut to the affected cylinder(s). The check
engine indicator lamp will continue to flash until the ignition switch
has been moved to the off position. Restarting the engine will clear
the flashing indicator and restore fuel to both cylinders. If another
misfire occurs, the check engine indicator lamp will resume
flashing and fuel will once again be cut to the affected cylinder(s).
After the 3
rd misfire, P0314 misfire fault is determined & set, the
check engine light will remain on and fuel will be cut to the
affected cylinder(s). If this occurs, your INDIAN dealer can assist.
HHEEAADDLLIIGGHHTTSS
The headlights automatically come on when the engine is started.
WARNING
Motorcycle riders must remain as visible as possible at all times.
To aid in this, the headlight must be on at all times. Do not modify
the ignition/headlight wiring to circumvent the automatic
headlight feature.
The headlights operate only when the engine is running. You can
use the high/low headlight beam switch to override this function
and allow the headlights to operate when the engine is not
running. Turn the power switch on, then toggle the high/low
headlight beam switch to turn the headlights on.
TTHHRROOTTTTLLEE CCOONNTTRROOLL GGRRIIPP
The throttle control grip is located on the right handlebar. Use the
throttle control grip to control engine speed.
While seated in the proper riding position:
• Roll the grip rearward
q
to open the throttle (increase engine
speed and power).
• Roll the grip forward
w
to close the throttle (decrease engine
speed and power), and cancel cruise control.
49
INSTRUMENTS, FEATURES AND CONTROLS
https://www.motorcycle-manual.com/