Any other use or modification of the device is not authorised. No liability will be
accepted for consequential damages or for damages caused by improper use or
incorrect operation. No liability will be accepted for consequential damages
caused by any function or by malfunction. Unless any liability is specifically
required by law, claims for damages, in particular those for personal injury or
property damage caused by non-functioning or malfunctioning of the device,
are excluded.
This appliance is not intended to be used by people (including children) with
restricted physical, sensory or mental capacities, or a lack of experience and/or
knowledge, unless they are supervised by, or receive instructions how to use the
appliance from a person responsible for their safety.
DF110TX transmitter with connection cables
DF110RX receiver with connection cables
2x radial antenna 3dB
2x mains adapter 5 V DC
3x adapters
4 screws
4 plugs
User manual
3. Package contents
4. Features and Equipment
!
!
!
!
!
!
!
!
(see Fig. A and B)
Transmitter D110TX (see Fig. A)
1
Transmitter
2
Antenna connection
3
3 dB radial antenna
4
Mains adapter
5
Mains adapter connection
6
Video connection
Operating instructions
1. Introduction
2. Proper use
The digital wireless transmission set consists of the transmitter DF110TX and
receiver DF110RX each with a mains adaptor.
This system is intended to be used for the wireless transmission of video and
audio signals.
The A/V source (from a video camera for example) input into the transmitter is
converted to a digital wireless signal which is transmitted in the 2.4 GHz
frequency band. The receiver converts this signal back to analog A/V signals as
output to a display device (for example a TV set).
The wireless transmission is digital and on constantly changing frequencies
(frequency hopping) which are synchronised between the transmitter and the
receiver. Only the receiver which has been "paired" with the transmitter can
receive the synchronised signals. This security feature is designed to prevent
access to the transmitted signal by third parties.
The maximum range of the wireless signal in open spaces is typically 100m ( up
to 200m in optimal conditions) with line of sight contact between transmitter
and receiver. Within buildings the range is greatly reduced by walls and floors,
in particular those made of steel reinforced concrete, to a typically about 20m.
Two sets of transmitter and receiver can be coupled in order to extend the
wireless range. In this way the set can be used as a wireless "repeater".
The power is supplied through the supplied mains adapters connected to a
230VAC, 50Hz mains supply.
The components are for indoor use only and must be protected from moisture.
The set is for use in private households.
Read through these operating instructions fully and carefully. The operating
instructions belong to this product and contain important points concerning
bringing the appliance into service and its operation.
Always pay attention to all safety instructions. Should you have any questions or
be unsure about operating the appliance ask a specialist. Keep these instructions
in a safe place and should the need arise pass them on to a third party.
GB
7
Adapter
8
Audio connection
9
Power LED
10 Connection-LED
11 “ P a i r i n g ” -
B
u
t
t
16 - GB
