background image

7 of 29

Service Manual UK

Indesit

Company

English

ADVICE & RECOMMENDATIONS

This appliance was designed for non-
professional, household use.

Before using the appliance, read the instructions 
in the owner’s manual carefully since it contains 
all the instructions you require to ensure safe 
installation, use and maintenance. Keep this 
owner’s manual in a safe place for future 
reference.

When you have removed the packing, check 
whether the appliance is intact. If you have any 
doubts, contact a qualified professional before 
using the appliance.

Never leave the packing components (plastic 
bags, polystyrene foam, nails, etc.) within the 
reach of children since these are a source of 
potential danger.

The appliance must be installed by a qualified 
technician in compliance with the instructions 
provided by the manufacturer.

The latter denies all responsibility for improper 
installation which may harm persons and 
animals and damage property.

The electrical safety of this appliance can only be 
guaranteed if the latter is correctly and efficiently 
earthed, in compliance with regulations on 
electrical safety. Always ensure that this vital 
safety measure has been taken. If you have any 
doubts, call in a qualified technician to check the 
electrical system thoroughly.

The manufacturer denies all responsibility for 
damage resulting from a system which has not 
been earthed correctly.

Before powering the appliance, check whether 
the technical characteristics featured on the 
appliance data plate correspond with those of the 
mains electrical system.

Check that the current load of the mains supply 
and of the power sockets is suitable for the 
maximum power of the appliance, indicated on 
the appliance data plate. If in doubt, contact a 
qualified professional.

This appliance must only be used for the 
purpose for which it was expressly designed. 
Any other use (such as heating a room for 
example) is considered to be improper and 
consequently dangerous.

The manufacturer denies all responsibility for 
damage resulting from improper or incorrect use 
of the appliance.

If you use small electric appliances near the hob, 
make sure their power supply cable does not 
come into contact with the hot parts of the hob.

Certain fundamental rules must be followed 
when using electrical appliances.
The following are of particular importance:

do not touch the appliance with wet or damp 
hands,

never use the appliance when barefoot,

never use extensions,

never pull on the power supply cable or the 
appliance itself to unplug it from the mains 
socket,

never leave the appliance exposed to 
atmospheric agents (rain, sun, etc.),

do not allow children or persons who are not 
familiar with the appliance to use it without 
supervision.

Always unplug the appliance from the mains 
or switch off the main switch before cleaning 
or performing any cleaning or maintenance 
operations.

If the surface of the glass cracks, unplug 
the appliance immediately.

 For any repairs, 

contact only an authorised after-sales service 
centre and demand original spare parts. 
Failure to comply with the above may 
compromise the safety of the appliance.

Cut the power supply cable after 
disconnecting it from the power mains when 
you decide not to use the appliance any 
longer. Also make all potentially dangerous 
parts of the appliance safe, above all for 
children who could play with the appliance.

The glass ceramic hob is resistant to thermal 
and mechanical shocks. 

However, it may 

break due to a shock caused by a sharp 
object, such as a tool for example. In this 
case, unplug the appliance immediately 
and contact an authorised after-sales 
service centre to have it repaired.

Remember that the heating area stays hot for 
at least half an hour after being turned off; 
please refrain from placing any cookware or 
other items on the cooking zone while still hot.

Do not turn on the heating zones if aluminium 
foil or plastic items have been placed on the 
hob surface.

Do not go near the heating zones when these 
are still hot.

Make sure all pan handles are always pointing 
inwards towards the centre of the hob to 
prevent any accidental spills.

Содержание VIA640C






























Отзывы: