20 of 37
Service Manual UK
Indesit
Company
English
PROGRAMME INFORMATION
Using the Machine
1. Sort the laundry and load the machine.
2. Check the filter is clean and the water container is empty.
3. Press the On/Off button, the display will illuminate.
4. Press the required programme button that suits the load being dried.
5. Choose Timed Dry or Dryness Level (see programme details for more information).
6. Set a delay time and any other required options.
7. Press Start, the display will show the time to dun (Timed Dry) or an estimated time (Automatic
programme).
8. If for any reason the programme is interrupted, to resume the cycle the door must be closed and
Start pressed.
9. During the last few minutes of the cycle, the machine will do a final cool down phase, this phase
should always be allowed to complete.
10. The sound, if selected, will sound to signal the cycle is finished.
11. If Crease Care has been selected, the drum will tumble occasionally for 10 hours or until the door
is opened.
My Cycle Button (M)
This cycle can be used to store the customers most used programme and options.
After the programme and options have been selected, press the M button for 5 seconds, the buzzer
will beep and the second line of the display will show 'MY CYCLE'.
To select 'My Cycle' press the M button and then Start. The selected favourite programme and options
will then start.
SPECIAL PROGRAMMES - special programmes available depend on model
Easy Iron is a short 10 minute programme (8 minutes of heat followed by a 2 minute cool tumble
period) which fluffs the fibres of the clothing that has been left in the same position/location for an
extended period of time. The cycle relaxes the fibres and makes them easier to iron and fold.
Easy Iron is not a drying programme and should not be used for wet articles of clothing.
This cycle is ideal for traditional fabrics like cotton or cotton mix, the effect on acrylic fibres is not so
effective.
Easy Iron Programme
