background image

EN

3

Condenser unit - remove any fluff build-up 

from the condenser on a monthly basis.

Step 1
Open the condenser cover
- grip the handle and pull 
towards you.

Step 2
Remove the condenser by 
turning the 3 catches, then pull 
the condenser towards you. (It is 
normal for some residual water 
to be left in the tubes).

Step 3
Clean the condenser with 
running water over the rear side 
to remove any fluff deposits. 

Step 4
Replace the condenser unit; 
make sure that the unit is 
securely in place, that all 3 
catches are fixed and that the 
position arrows on the front end 
of the condenser are pointing 
upwards.

Failure to clean the condenser unit may cause 
premature failure of the dryer.

Product Data

Rated capacity of cotton laundry for the "standard cotton 
programme" at full load - kg

8.0

Energy efficiency class

B

The weighted Annual Energy Consumption (AEc)*  kWh

559.8

This household tumble drier is a

Automatic

This household tumble drier is a

Condenser

Energy consumption full load; Edry - kWh

4.77

Energy consumption partial load; Edry½ - kWh

2.53

Power consumption: off-mode  (Po) - Watts

0.14

Power consumption: left-on mode (Pl) - Watts

2.39

Duration of the 'left-on mode' for  power management system - 
minutes

30

Prog. Time - weighted (Tt) full & partial load - minutes

104

Full load (Tdry) - minutes

139

Partial load (Tdry½) - minutes

78

Condensation efficiency class

B

Average condensation efficiency - %

full load  (Cdry)

82

partial load  (Cdry½)

80

weighted (Ct) full & partial load

81

Airborne acoustical noise emissions - dB(A) re 1 pW

68

The Standard Cotton Programme** suitable for drying normal wet cotton landry that it 
is the most efficient programme in terms of energy consumption for cotton used at full 
and partial load.

This is the test cycle in accordance with Regulation 392/2012.

See our website for all product fiche data:

http://www.indesit.com/indesit/.

*Consumption per year is based on 160 drying cycles of the 

standard cotton programme at full and partial load, and the 

consumption of the low-power modes. 

Actual energy con-

sumption per cycle will depend on how the appliance is used.

Содержание IDCE 8450 B H





















Отзывы: