Indesit AS60VEX Скачать руководство пользователя страница 49

Страница: 49 / 78

Language

English

vic

ability

Service Manual

Yate Production Dryers

Edition

2006.09.21

- V&C. Scraps on inner rear panel (S/N is before the 29th

September 2004 for C, the 29th of November 2004 for

V). The rear impellors are distorted: to substitute with

C00113867 (condenser) and with C00112153 Inner &

C00116327 Outer (vented).

- V&C. Scraps on heater cover (S/N is before the 10th of

March 2005 for C, and the 29th of November 2004 for

V): substitute the heater cover with the one to which is

added cut-out, part code C00115747 (condenser) and

C00116328 (vented).

- V. Heater covers with full anulus. Increased the clear-

ance between the rear impeller and the rear cover.

From the 8th of August 2005. Part code C00116328.

- V. Motor cradle holes moved down 2mm to angle motor

shaft and impeller away from the inner rear panel and

heater cover. (S/N from the 7th of March on). Part code

C00112150 Motor & Cradle.

- C. Take the wheels off, convert bearing pads. Part code

C00118931.

Check the fan.

Check if the drum has got off the wheels during the

transit. (Possible with the S/N’s before the 8th of October

2004: added in production the drum support pads).

Noise

INTERVENTION TO BE PERFO

RMED

CORRECTIVE ACTIONS

- C. Scraps on inner rear panel louvre’s (S/N before the

15th of November 2004). Clearance between drum and

inner panel: substitute the inner rear panel with the

C00113861 which has 3mm segment removed from

inner rear panel louvre’s.

- V&C. Rubbs on rear panel. Drum rear defl ection; does

not have the correct ‘D’ dimension (S/N before the

6th of June 2005): substitute the drum. Part code

C00112157 (Drum Vented) & C00113953 (Drum Con-

denser).

- C. Rubbs on rear panel (S/N is before the 18th of April

2005): susbtitute the drum seal with the ticker one (part

code: C00113823).

- C. Rubbs on front bearing (S/N is before the 8th of

August 2005): remove the ‘top right hand’ bearing pad

(when viewed from the front of a built machine) from

condenser airduct assembly.

- V&C. In the case of drum lip catching between front

bearing pad and airduct (S/N before the 22nd of August

2005): substitute with the bearing pad with clip feature

(part code C00112144).

Check if the drum is scraping / rubbing / catch-

ing.

Содержание AS60VEX















































































Результаты поиска

Содержание AS60VEX

Отзывы:

Похожие инструкции для AS60VEX

Бренды по названию

Популярные бренды

Indesit AS60VEX, Руководство по обслуживанию

Результаты поиска

Содержание AS60VEX

Отзывы:

Похожие инструкции для AS60VEX

Бренды по названию

Популярные бренды