SNS20-28C Actuator with Internal Battery Back-up Installation, Operation & Maintenance Manual
Page 2
INTRODUCTION:
Thank you for selecting Indelac Controls, Inc. (
ICI
) for your valve or damper automation
requirement. We at
ICI
are proud of our products and feel confident they will meet or
exceed your expectations of quality and reliability.
Every precaution has been taken to insure that your equipment will arrive undamaged;
however, accidents do occur. Therefore, the first thing you must do upon receipt of your
package is to inspect it for damage. If the box is damaged there is a possibility that the
equipment inside the box may be damaged as well. If this is the case
YOU MUST FILE A
CLAIM
with the delivering
CARRIER
. All shipments are
F.O.B.
our factory and it is
YOUR
RESPONSIBILITY
to file a claim for damages.
STORAGE:
If the actuators are scheduled for installation at a later date:
1.
Store off the floor.
2.
Store in a climate controlled building.
3.
Store in a clean and dry area.
FOR FUTURE REFERENCE RECORD:
1.
Actuator model number
2.
Actuator enclosure type NEMA 4 , NEMA 4X _, NEMA 7 _, NEMA 4 & 7__
3.
Actuator output torque
LB-IN
4.
Motor characteristics, Voltage
Hertz
Phase
5.
Actuator serial number
6.
Date of installation
Put into operation
7.
Valve Data:
7a. Manufacturer
7b. Style & fig. No.
7c. Size
7d. End connection
7e. Material of construction, Body
Stem & ball
7f. Brake away torque
LB-IN @
PSI
7g. Other helpful data
MEDIA:
1.
System media
2.
Temperature,
(deg. F.) Maximum,
. Minimum,
.
3.
Pressure
PSI
*As this information is listed it is important to pay attention to all of the actuator specifications
relative to the valve specifications and system requirements. If the actuator is not properly sized
for the valve and application the life will be shortened or it may not work at all.
