Indel Webasto isotherm 101N0212, Инструкция по эксплуатации

Страница: 41 / 212

ISOTHERM Digital Display
41
- Possibility of selecting and checking the temperature within a wide-scale
range from that of the refrigerator and that of the freezer
- Possibility of selecting temperature indication in Celsius or Fahrenheit
- Possibility of operation with the maximum level of performance or energy
saving
- Possibility of selecting 3 different battery protection levels and resulting
compressor operation
- Possibility of setting temperature offset for 3 different temperature ranges
- Possibility of sub-cooling in the event of an available surplus of energy
- Description of the functions of buttons present on the Display Fig.27:
o Direct functions
• 1
On button
• 2 ECO / ITC function change button
• 3 Display
• 4 ITC active function LED
• 5
ECO active function LED
• 6 Button for temperature value decrease or menu scrolling
• 7 Button for temperature value increase or menu scrolling
o Description:
• «1» Unit On and Off button. To switch on the refrigerator, press
button «1» . The compressor will switch ON with factory pre-set
settings. The temperature shown on the display is in degrees
centigrade and corresponds with room temperature when starting
up for the first time.
• «2» Press button 2 to activate the ECO or ITC mode, alternatively.
When one of the two functions is active, the corresponding LED
under the display will light up.
• With ECO function active, the refrigerator will operate at
minimum power, in energy-savings mode. Achievement of the set
temperature cannot be guaranteed in this mode.
• With the ITC function active, FAST COOLING activates, or rather