Indel B CR86, Инструкция по эксплуатации, Страница: 14 / 42

CR86
CR86_(DC)_IM_20200723
14
FIXING WITH INTERNAL SCREWS
The refrigerator has been designed to allow fixing to the housing with 4 screws that can be screwed into
the internal walls of the refrigerator itself.
The inner compartment of the refrigerator has 4 concavities that indicate the points where holes can be
drilled in the compartment. The concavities have a semicircular side designed to house a washer (max.
external diameter 15mm).
The steps for fixing with internal screws are as follows:
1. Position the fridge in the housing in the desired position;
2. Place the tangent washer against the edge of the half moon recess inside the compartment;
3. Locate the centre of the washer (which will indicate where the hole is to be drilled)(Fig. A);
4. Drill a perpendicular hole through the compartment and the external casing of the fridge (or
alternatively, use a self-tapping screw);
5. Screw the screw into the hole made to fix the fridge in the housing (Fig. B);
6. Repeat the same operation for all 4 concavities on the inner wall;
The refrigerator is now fixed to the walls of the housing cabinet.
CAUTION!
Do not tighten the screws excessively or else the refrigerator compartment could crack
FIG. A
FIG. B