Incredible Technologies Golden Tee Home Edition, Руководство пользователя

Страница: 33 / 43

Golden Tee
®
Home Edition Page 29
© Copyright 2020 Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.
All other marks are the properties of their respective owners. All rights reserved. PN 815000356RB
Symptom Probable Cause Solution
No picture after boot up
Normal black screen is displayed
for a period of time just before 3D
graphics are displayed.
This is normal operation. Be sure to
wait at least two minutes after
LOADING GAME is displayed to
see if video appears.
Distorted or fuzzy picture Improper cable connection
Be sure the video cables are
securely connected at the computer
video card and at the HDTV. This is
especially critical if using a
component video cable.
Picture is too big for the screen or
does not fill the entire screen.
Incorrect DIP switch configuration.
Be sure Sw201 is configured to
match the desired video.
Increase or decrease screen size in
games adjustments.
Location is in General
Settings>Operator>System
Tests>Video Screen
Settings>Screen Size Adjust
HDTV Audio Problems
No Audio
RCA audio cable is not connected
to the system box or HDTV
Connect the RCA audio cable to the
system box and then to the proper
input on the HDTV.
RCA audio cable is connected to
the wrong audio input of the HDTV
You must connect the audio cable to
the matching video input selected.
For example: If you are using
Component 1 the audio must go to
Component 1.
HDTV audio is muted
Turn the mute off in the HDTV
menu.
Volume is turned down on the
monitor or game sounds are set too
low. Adjust the volume on the game to
75% and then adjust the game
volume to your desired level.
Low volume
Volume is turned down on the
monitor or game sounds are set too
low. Adjust the volume on the game to
75% and then adjust the game
volume to your desired level.
Scratchy or distorted audio Poor cable connection RCA cable
Be sure the RCA audio cable is
securely and entirely connected to
the mating connectors.
No audio
DIP switch settings are incorrect for
your application
Refer to Monitor Applications at the
back of this manual for proper
setup.