-
8
-
13
Trouble shooting
VUE projector
can't
turn
on
Symptoms
Reasons
Solution
Images are
not clear
NO images
VUE Won't Work
No power
The lens is not focused correctly
The screen is not aligned properly
Incorrect
operation
of the USB card
/ smartphone
The input signal device is not
connected with the projector
correctly
The input signal isn't selected
correctly.
The system crashes
Ensure the AC power adapter is properlyconnected
Adjust by Focus Key
Adjust VUE projector position(0.5-3M,it is suitable)
Refer to input source's instruction manual
Using a pin, press and hold the reset button
Check the connect interface again.
Using VUE
projector or remote control source
button, and then choose the right signal input
source.
No 3D effect
1.Didn't transfer to 3D mode
2. 3D glass is not power on
3. 3D glass is not match.
1. Transfer to 3D mode. 2. power up the 3D
glass 3. Glasses must be DLP Link
3D glass blinking
3D Glass's battery is low
Charge the 3D glass
o
20
o
20
<8m
<3.5m
11
Battery installation of remote control
1>Remove battery box and
plastic isolation piece
3>Restore to original
2>Replace battery
Plastic isolation piece
2
1
The battery is pre installed but to prevent any discharging before operating we have place
a plastic isolation piece, please just pull it out to operate the remote.
Notice: In the first part, press button toward arrow, press the second part button and then get it out.
12 Remote control operate range
Notice:
Direct sunlight may affect the perfomance of the remote control
8
