InCoax D2508, Руководство пользователя по оборудованию

Страница: 13 / 20

InCoax DPU – Hardware User Manual
13
Physical
• Northbound fiber SFP+ port inside enclosure
• Multi Source Agreement (MSA) compliant, SerDes – 10 Gbps data rate, SFF-8472 (see reference
• { h } ) – Diagnostics interface
a
• Supporting XGS-PON, XG-PON, GPON, EPON and Ethernet
• Management Ethernet port : 10 / 100 / 1000 Mbps, configuration and statistics port
• RJ-45 connector supports type CAT5 UTP (as a minimum)
• Eight coax MoCA ports
• F-female connector - 3/8-UNEF32, 75 Ω
• F-female connector - 3/8- UNEF32, 75 Ω for 56VDC, 0.368A max power feed
Indicators
• Power on, Management, Trunk, Coax Link traffic and alerts
Dimensions
• 326 × 123 × 204 mm (W × H × D)
• Wall mount
Weight
• 7 kg
Environmental
• Outdoor equipment, IP67
• Type 4X enclosure
• Operating temperature: -30 °C to +70 °C

Relative humidity: 20 % to 80 %

Altitude: maximum 2000 m

Dynamic temperature control with cooling redundancy

Abnormal operation conditions alarms

Storage (non-condensing): -40 °C to +70 °C and 5 % to 90 % relative humidity

RoHS and RoHS 2. See reference {b}

UL 94 V-0. See reference {i}
Power
• 100-120VAC, 50/60Hz, 1.2A max
or
• 200-240VAC, 50/60Hz, 0.6A

Power consumption 45 W nominal when PA is activated

Automatic power on after power grid failure
IEEE Standards
• IEEE 802.3 (Ethernet) {k}
• IEEE 802.3u (Fast Ethernet) {m}
• IEEE 802.1p (Priority tags)
{g}
• IEEE 802.1q (VLAN with full VLAN-ID range. Up to 200 VLAN Configurable internal VLAN for policing,
shaping and prioritization for ingress untagged frames) {a}
• IEEE 802.1ad (QinQ)
{j}
a
InCoax recommends using the SFP+ module:
Fiber MM: Ubiquiti 10G UF-MM-10G
Fiber SM: InCoax 10G OS-SP96-3110D/ Ubiquiti 10G UF-SM-10G/ Ubiquiti Bi-Di UF-SM-10G-S/ Finisar
FTLX1475D3BTL/ NorthLab NORT-1031-LRT/ FS 10GBASE-BX BiDi SFP+ 1330nm-TX/1270nm-RX 10km DOM
Transceiver Module/
FS 10GBASE-BX BiDi SFP+ 1270nm-TX/1330nm-RX 10km DOM Transceiver Module
Copper: MikroTik 10G S+RJ10/ Ubiquiti 10G UDC-2