Incite Fire Taktis Vision, Инструкция по установке и эксплуатации

Страница: 12 / 20

Installation 3
Man-1161IN Rev.A
Taktis Vision Installation & Operation Manual
9
Mounting the Flush Enclosure
1/ Open the enclosure by removing the four screws located at each corner of the front fascia. Disconnect earth wire
and put enclosure lid safely to one side.
Figure 3-8
Opening the Flush Enclosure
2/ Referring to the diagram below, make a hole and using suitable fixings, secure the flush enclosure back box
through the fixing holes provided.
Figure 3-9
Flush Enclosure Back Box Dimensions
Note: 175mm X 240mm are the advised wall cut-out dimensions.
234.0
240.0
190.6
171.2 175.0 188.8 98.8
50.0
ALL DIMENSIONS IN MM
NOT TO SCALE
Ø4.5
Ø4.5