INSTALLATION INSTRUCTIONS
DROP DOWN PROJECTOR LIFTS
P/N 900411-100-400 & P/N 900411-LCD
1.0 GENERAL
INCA PROJECTOR LIFTS COME IN ALL SIZES AND WEIGHT CAPACITIES. ALL
PROJECTOR LIFTS COME WITH THE FOLLOWING COMMON PARTS:
•
AN ALUMINUM ENCLOSURE
•
ROLLING CABLE TRAYS FOR YOUR SIGNAL CABLES
•
EXTERNAL JUNCTION BOX TO CONNECT POWER AND CONTROLLERS
•
A CAGE TO HOUSE PROJECTOR
•
A SEAL PLATE TO CLOSE THE LIFT IN THE CEILING WHEN RETRACTED
2.0 SHIPPING
PROJECTOR LIFTS ARE SHIPPED IN CRATES, WITH A MINIMUM OF 3” BUBBLE WRAP
BETWEEN THE PROJECTOR LIFT AND THE CRATE.
ALL PROJECTOR LIFTS ARE SHIPPED COMPLETELY ASSEMBLED, READY FOR
INSTALLATION.
2.1. RECEIPT
UPON RECEIPT OF YOUR PROJECTOR LIFT, REMOVE IT FROM THE SHIPPING
CRATE. UNWRAP, AND INSPECT FOR DAMAGE. VERIFY THE JUNCTION BOX,
CABLES AND CONTROLLERS THAT WERE ORDERED ARE ACCOUNTED FOR.
3.0 OPERATION
CONNECT THE 25’ MULTI-CONDUCTOR CABLE BETWEEN THE PROJECTOR LIFT &
THE EXTERNAL JUNCTION BOX. CONNECT TO THE JUNCTION BOX THE
CONTROLLER ORDERED. SELECT ONE OF THE FOLLOWING TWO POSITIONS ON THE
JUNCTION BOX:
- 1 -
