inbody BPBIO320S, Руководство пользователя

Страница: 36 / 46

36 37
Others
*
The BPBIO320S was manufactured by the quality control procedures of InBody Co., Ltd. InBody Co., Ltd. complies with ISO9001 and ISO13485
which are international quality management systems.
*
This equipment complies with IEC60601-1, the international safety standard for electronic medical equipment. This equipment also complies
with IEC60601-1-2, the international standard for electromagnetic compatibility.
A. Exterior and Functions
The names and functions of each part of the BPBIO320S are as follows:
* Please check each component of the system for damage prior to installation.
V.
<Visible when opening
the printer paper cover>
: A display screen showing results, current time, etc.
: A button to print Result Sheet
: A button to start or stop a test
: Emergency stop button
: Printer paper cover
Elbow Sensor : A sensor to guide the correct examination posture
: UP/DOWN buttons to adjust settings
: Volume control knob
: RS232C (9-pin serial) connection terminal
: A port used to connect a mercury monitor in order to adjust the pressure value
: A terminal used to connect a multi-display device
: Input for external power source (AC 100-240V, 50/60Hz), Fuse (F2.5AL, 250V)
: A switch used to turn the equipment on/off
: A groove that can be fi xed to a table for theft prevention
: Speaker
: Motion sensor to automatically switch from sleep to standby mode