11
Telnet server is ON, debugging personnel can view VUH config via
IP.
Step 6. Press Network to config VUO info.
Warning:
Before config, please make sure VUO is plugged to power and is in the same segment
with VUH.
1.
Fill in VUO name, master VUO IP address, set enable status to
, see Figure
Figure 4-8
2.
Fill in VUO name, and extension VUO IP address, select device type, set enable
status to
.
The device supports n19 units of extensions, and you can press
to page down
to add more extensions.
4.3.3 Successfully Debug
On VUO dial VUO room no. to call VUH. VUH pops up monitoring video and operation
buttons, see Figure 4-9.
