2. Comment connecter à un iPad
Étape 1:
Installez iPad sur le clavier Bluetooth.
Étape 2:
Basculez le bouton vers marche/ON, le clavier sera ainsi démarré.
Étape 3:
Pressez sur le + en même temps. Indicateur 2 clignotera en bleu, ce qui signifie que le
clavier est sous mode d’appairage Bluetooth.
Étape 4 :
Sur votre iPad, accédez à Réglages – Bluetooth – Activé.
Étape 5 :
Votre iPad trouvera « Inateck KB02008 », qui est figuré dans la liste d’appareils disponibles.
Étape 6 :
Choisissez « Inateck KB02008 ».
Étape 7 :
Indicateur 2 s’éteindra, ce qui signifie que le clavier est connecté à votre iPad avec succès.
Note
A. Après un succès d’appairage, le clavier et votre iPad seront désormais jumelés automatiquement.
Néanmoins, quand il y a l’interférence ou si le signal Bluetooth d’iPad n’est pas stable, le jumelage
s’échoue peut-être. Dans ce cas-là, veuillez svp suivre les étapes suivantes :
a. Supprimer tous les données d’appairage de KB02008 existées sur l’iPad
b. Désactivez le Bluetooth sur iPad
c. Suivez « Comment connecter à un iPad »
B. Si l’appairage Bluetooth s’échoue, veuillez vérifier si Inateck KB02008 est démarré et à la portée de votre
iPad. Veuillez suivre les étapes ci-dessous pour reconnecter :
a. Supprimer tous les données d’appairage de KB02008 existées sur l’iPad
b. Désactivez le Bluetooth sur iPad
c. Suivez « Comment connecter à un iPad »
C. Le moyen pour restaurer la configuration d’usine du clavier Bluetooth
Pressez sur Fn + shift (à gauche) + Delete en même temps.
3. Touches de Fonction
1) Les touches avec icône rectangulaire sont des touches de fonction, qui fonctionnent avec la touche « Fn ».
Par exemple, pressez sur Fn et Switch Language, la configuration de langue sera modifiée sur votre iPad.
Voici les touches de fonction sur ce clavier :
Home
Decrease
Increase
Virtual Keyboard
Search
Switch language
Previous track
Paly/Pause
Next track
Mute
Volume down
Volume up
Lock
Siri