Inalto IFLW7D40, Руководство пользователя, Страница: 9 / 28

9
REMOVING TRANSPORT BOLTS
WARNING! You must remove the transport bolts from the backside before using the product.
LEVELING THE WASHER DRYER
WARNING! The lock nuts on all four feet must be screwed tightly against the housing.
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a spanner. Make sure the machine is level and steady.
CONNECTING THE WATER SUPPLY HOSE
To prevent leakage or water damage, ensure you follow the instructions below;
• Do not kink, crush or modify water inlet hose.
• Connect the water supply hose to the water inlet valve and a water tap with cold water as indicated.
NOTE! Connect manually, do not use tools. Check if the connections are tight.
DRAIN HOSE
• Do not kink or protract the drain hose.
• Position drain hose properly, otherwise damage might result of water leakage.
There are two ways to place the end of drain hose
1. Put it into the water trough.
INSTALLATION
Remove transport bolts
• You must remove the transport bolts from the backside before using the product.
Warning!
Loosen the 4 transport
bolts with a spanner.
Remove the bolts
including the rubber parts
and keep them for future
use.
Close the holes using the
cover caps.
Levelling the washer dryer
• The lock nuts on all four feet must be screwed tightly against the housing.
Warning!
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a
spanner. Make sure the machine is level and
steady.
Connect the water supply hose
To prevent leakage or water damage, follow the instructions in this chapter
• Do not kink, crush or modify water inlet hose.
Warning!
Connect the water supply hose
to the water inlet valve and a
water tap with cold water as
indicated.
• Connect manually, do not use tools. Check if the connections are tight.
Note!
11
INSTALLATION
Remove transport bolts
• You must remove the transport bolts from the backside before using the product.
Warning!
Loosen the 4 transport
bolts with a spanner.
Remove the bolts
including the rubber parts
and keep them for future
use.
Close the holes using the
cover caps.
Levelling the washer dryer
• The lock nuts on all four feet must be screwed tightly against the housing.
Warning!
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a
spanner. Make sure the machine is level and
steady.
Connect the water supply hose
To prevent leakage or water damage, follow the instructions in this chapter
• Do not kink, crush or modify water inlet hose.
Warning!
Connect the water supply hose
to the water inlet valve and a
water tap with cold water as
indicated.
• Connect manually, do not use tools. Check if the connections are tight.
Note!
11
INSTALLATION
Remove transport bolts
• You must remove the transport bolts from the backside before using the product.
Warning!
Loosen the 4 transport
bolts with a spanner.
Remove the bolts
including the rubber parts
and keep them for future
use.
Close the holes using the
cover caps.
Levelling the washer dryer
• The lock nuts on all four feet must be screwed tightly against the housing.
Warning!
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a
spanner. Make sure the machine is level and
steady.
Connect the water supply hose
To prevent leakage or water damage, follow the instructions in this chapter
• Do not kink, crush or modify water inlet hose.
Warning!
Connect the water supply hose
to the water inlet valve and a
water tap with cold water as
indicated.
• Connect manually, do not use tools. Check if the connections are tight.
Note!
11
INSTALLATION
Remove transport bolts
• You must remove the transport bolts from the backside before using the product.
Warning!
Loosen the 4 transport
bolts with a spanner.
Remove the bolts
including the rubber parts
and keep them for future
use.
Close the holes using the
cover caps.
Levelling the washer dryer
• The lock nuts on all four feet must be screwed tightly against the housing.
Warning!
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a
spanner. Make sure the machine is level and
steady.
Connect the water supply hose
To prevent leakage or water damage, follow the instructions in this chapter
• Do not kink, crush or modify water inlet hose.
Warning!
Connect the water supply hose
to the water inlet valve and a
water tap with cold water as
indicated.
• Connect manually, do not use tools. Check if the connections are tight.
Note!
11
Loosen the 4 transport
bolts with a spanner.
Remove the bolts
including the rubber parts
(keep them in a safe place
for future use).
Close the holes using the
cover caps.
2. Connect it to the branch drain pipe of the trough.
INSTALLATION
Drain Hose
There are two ways to place the end of drain hose:
1.Put it into the water trough.
2.Connect it to the branch drain pipe of
the trough.
•
• Position drain hose properly ,otherwise damage might result of water leakage. Do not kink or protract the drain hose.
Warning!
Water
trough
10
0c
m
M
ax
.
M
in
.
60
cm
10
0c
m
M
ax
.
10
0c
m
M
ax
.
M
in
.
60
cm
12
INSTALLATION
Drain Hose
There are two ways to place the end of drain hose:
1.Put it into the water trough.
2.Connect it to the branch drain pipe of
the trough.
•
• Position drain hose properly ,otherwise damage might result of water leakage. Do not kink or protract the drain hose.
Warning!
Water
trough
10
0c
m
M
ax
.
M
in
.
60
cm
10
0c
m
M
ax
.
10
0c
m
M
ax
.
M
in
.
60
cm
12