inalto.com.au
15
INDICATION LIGHTS
PROBLEM
SOLUTION
Flashing
Pause/Start
light
and
Lock
light ( )
Door is not closed properly
•
Restart after the door is closed
•
Check if there are clothes or washing articles stuck
Flashing
No Spin
light
Water injecting problem
while washing
•
Check if the water pressure is too low
•
Straighten the water pipe
•
Check if the inlet valve filter is blocked
Flashing
No Spin
and
Pause/Start
light
Overtime water draining
•
Check if the drain hose is blocked
Flashing
Prewash
light
Water overflow
•
Restart the washer
Note: If the above steps don’t resolve your issue or you cannot resolve the fault by yourself:
• Press the “On/Off” button.
• Switch off the appliance at the power outlet and remove the plug.
• Call our customer service team.
Technical Specifications
Below outlines the technical specifications for your InAlto Washing Machine.
Washing Capacity
6.0kg
7.5kg
Dimensions (W � D � H mm)
595 � 495 � 850 mm
595 � 565 � 850 mm
Net Weight
61kg
68kg
Rated Power
1950W
2000W
Power Supply
220-240V, ~50Hz, 10Amp
220-240V, ~50Hz, 10Amp
Standard Water Pressure
0.05MPa~1.0MPa
0.05MPa~1.0MPa
NOTE:
This product is subject to continuous improvement, specification are subject to change without prior notice.
This product was tested in accordance with AS/NZS 2040.2 and AS/NZS6400 using program: "Cotton Eco 60", which is
the program recommended for a normally soiled cotton load at rated capacity.