3. Add coffee ground into filter. Usually a cup of coffee need a level spoon of coffee ground,
but you may adjust according to you taste properly.
4. Close the top cover of the coffee maker and place the glass jar on the keep warm plate
horizontally.
5. Plug the power cord into the power source, turn on the switch and the indicator will be
illuminated. You may stop to brew by putting off the switch button at any time, the indicator
will be glow. The appliance will start brewing once you press the switch again.
Note
: You can take out the glass jar and serve at any time. The appliance will stop dripping
automatically. But do not keep the appliance in this state for more than 30 seconds.
7. Do not open the tank cover when the coffee maker is operating. The flow back of hot water
will damage the appliance and the hot water in the tank may splash to burn person.
Note
: The coffee you get will be less than the water you have filled in the tank, as some water is
absorbed by the coffee ground.
9. When the process is finished, if you do not want to serve immediately, do not unplug the
power, and keep the switch on, the coffee can be kept warm in the keeping warm plate. We
suggest the time of keep warm should not be more than 1 hour. You should unplug the power
cord from the electrical outlet when the coffee maker is not in use.
Note
: Pay attention to pour the coffee out, otherwise you may hurt as the temperature of coffee
just finished is high.
Cleaning and Maintenance
1. Be sure to unplug the appliance before cleaning. To protect against electrical shock, do not
immerse cord, plug or unit in water or liquid.
2. Clean the funnel and glass jar after each use with hot water.
3. Wipe the product's exterior surface with a soft, damp cloth to remove stains.
4. Water droplets may buildup in the area above the filter and drip onto the product base during
brewing. To control the dripping, wipe off the area with a clean, dry cloth after each use of
the product.
5. Use a damp cloth to gently wipe the keep warm plate. Never use abrasive cleaner to clean it.
Cleaning of mineral deposits
·
To keep your coffee maker operating efficiently, you should clean away the mineral deposits
left by the water regularly according to the water quality in your area and the frequency of
use of the appliance. The detail is as follows.
a) Fill the glass jar with one part of white vinegar and three parts of cold water, pour the water
and vinegar mixture into tank, do not putcoffee powder, brew the water-vinegar solution.
b) Repeat this process till all the yellow scaling comes out.
c) After this operation, put fresh water in this glass jar then brew it till the vinegar odor is
removed.
4
