
4
TROLL
9500
Operator’s Manual
0095110 rev. 007 01/09
cleaninG GUiDelines
Please help us protect the health and safety of our employees by
cleaning and decontaminating equipment that has been subjected to
any potential biological or health hazards, and labeling such equip-
ment. Unfortunately,
we cannot service your equipment without such
notification
. Please complete and sign the form below (or a similar
statement certifying that the equipment has been cleaned and decon-
taminated) and send it along to us with each downhole instrument.
• We recommend a good cleaning solution, such as Alconox
®
, a
glassware cleaning product available from In-Situ (Catalog No.
0029810) and laboratory supply houses.
• Clean all cabling. Remove all foreign matter.
• Clean cable connector(s) with a clean, dry cloth. Do not submerge.
If an instrument is returned to our Service Center
for repair or recalibration without a statement
that it has been cleaned and decontaminated,
or in the opinion of our Service Representatives
presents a potential health or biological hazard,
we reserve the right to withhold service until
proper certification has been obtained.
Alconox is a registered trademark of Alconox Inc.
Company Name ____________________________________________Phone ________________________
Address ________________________________________________________________________________
City __________________________________ State ________________ Zip _______________________
Instrument Type ___________________________________Serial Number ___________________________
Contaminant(s) (if known) __________________________________________________________________
_______________________________________________________________________________________
Decontamination procedure(s) used __________________________________________________________
_______________________________________________________________________________________
Cleaning verified by ________________________________________ Title ___________________________
Date _______________________________
Decontamination & Cleaning Statement
Section 1: introduction
• Clean the probe body—including the nosecone, restrictor, cable
head, and protective caps. Remove all foreign matter.
• Remove and clean all removable sensors. Rinse with deionized or
distilled water after cleaning.