In Shape 17401, Инструкция по эксплуатации

Страница: 37 / 58

37
NO
SE
FI
GB
DE
DK
ET
Functional check before use
Before the treadmill is connected to the
power, you must check that the belt can
move unhindered and without noise on the
rollers.
Connect the dead man’s switch to the
computer.
Plug the treadmill in so it goes into standby.
Press the Start button. The belt begins
to slowly turn. Press the Speed+/Speed-
/4/6/8/10/12/14 buttons.
Check that the belt speed changes
accordingly.
Press the Stop button to stop the treadmill.
Use
Connect the dead man’s switch to the
computer and place the cord around your
wrist or use the clip to secure it to your
clothes. This ensures that the treadmill stops
automatically if you are moved back off the
treadmill.
You can connect an MP3 player to the MP3
socket on the computer so you can listen to
music as you exercise.
Press the Start button. The belt starts to run
at 1 km/h.
Press the Speed+/- buttons to increase
or reduce the speed. The speed can be
adjusted from around 1 to around 16 km/h.
You can also select a speed of 4, 6, 8, 10,
12, 14 or 18 km/h directly by pressing the
equivalent buttons.
Press the I/- buttons to adjust the
incline of the treadmill.
If you want to use the computer’s
pulsometer function, you must position
your hands over the pulse sensors.
Reduce the speed, adjust the incline to
0 and press the Stop button to stop the
treadmill.