ENGLISH
17
6. Set alarm schedule with
Tune
dial and confirm
with
Select
.
•
[Daily]
The alarm is activated every day.
•
[Weekends]
The alarm is activated on Satur-
days and Sundays.
•
[Weekdays]
The alarm is activated from Mon-
day to Friday.
•
[Once][xx-xxxxxx]
(Date to be determined)
The alarm is activated only once. The date
must be set.
Note
If [DAB] or [FM] is selected, [last listened] will be
displayed. Press
Select
to confirm.
7. The volume bar will be displayed. Adjust the
volume with
Tune
dial and confirm with
Select
.
8. Switch on/off the alarm [Alarm on/ Alarm off]
with
Tune
dial and confirm with
Select
.
9. The alarm settings are stored and [alarm saved]
is displayed.
Activating or deactivating the alarm
1. Follow all the steps in the previous chapter until
point 8.
2. Use the
Tune
dial to select [Alarm off] to disable
the alarm or [Alarm on] to activate the alarm.
Confirm the selection by pressing
Select
.
Repeat alarm
When the alarm sounds, press
Snooze/Sleep
button to suspend alarm sound for a few minutes.
The alarm will start again after approx. 9 minutes.
Turning off the alarm
When the alarm sounds, press
Standby
to turn
the alarm off.
Setting the time
1. Select menu option [Time] by turning the
Tune
dial and confirm with
Select
.
2. Use
Tune
dial to select the desired sub-menu:
•
Set 12/24 hour:
Choice of 12 or 24 hour
format
•
Set Time/Date:
manual time and date set-
ting
•
Auto update:
Choice of DAB Update or No
Update
•
Set date format:
Choice of DD-MM-YYYY or
MM-DD-YYYY
Set the backlight
Turn the
Tune
dial to select the [Backlight] menu
item and press
Select
. You are now in the back-
light menu. Three options are available. Select
options and settings by turning the
Tune
dial and
confirm your entries by pressing the
Select
.
•
Display off:
On, 10-180 sec; On: Display per-
manently on; 10-180 sec: Display switches to
dimmed state after expiration of the preset time.
•
On level:
High, Medium, Low
•
Dim level:
High, Medium, Low
Setting the language
Note:
The default language is English.
Turn the
Tune
dial to select the [Language] menu
option and press
Select
. You are now in the lan-
guage setting menu. Select the desired language
with the
Tune
dial and confirm the selection by
pressing the
Select
.
Factory settings
Select menu option [Factory reset] with
Tune
dial
and confirm with
Select
.
Displaying the software version
Select menu option [SW version] with
Tune
dial
and confirm with
Select
.
Setting the sleep-timer
After a pre-selected amount of time, this unit can
automatically change to standby mode.
1. Push the
Snooze/Sleep
dial.
2. Use the
Tune
dial to select the desired options
and confirm by pressing
Select
:
•
[Sleep Off]
•
[15 minutes]
•
[30 minutes]
•
[45 minutes]
•
[60 minutes]
•
[90 minutes]
IM_PDR180BT-B_190617_V05_HR.indb 17
17/6/2019 18:46
