IMT TH36K164, Руководство пользователя

Страница: 56 / 135

54 TH36K164 Manual #99905544
Tirehand Parts Ordering Information
GENERAL
This section contains the exploded parts drawings, with accompanying parts lists, for the
assemblies used on the Tirehand 10. These drawings are intended to be used in conjunction with
those in 12916 and 9616 Crane manuals and the instructions found in the REPAIR section in
Volume 1.
CYLINDER IDENTIFICATION
To insure proper replacement parts are received, it is
necessary to specify the complete number/letter sequence
for any part requested. Part numbers may be cross checked
by comparing the stamped identification on the cylinder
case (See figure below) against the information contained in
the service manual. You must include the part number
stamped on the cylinder case when ordering parts.
WELDMENT IDENTIFICATION
Each of the major weldments on the tirehand bears a stamped part number. Any time a major
weldment is replaced, you must specify the complete part number as stamped on the weldment.
ORDERING REPAIR PARTS
When ordering replacement
parts:
1 Give the model number of the
unit.
2 Give the serial number of the
unit.
3 Specify the complete part
number. When ordering
cylinder parts, or one of the
main weldments, always give
the stamped part number.
4 Give a complete description
of the part.
5 Specify the quantity required.
Courtesy of Crane.Market