IMS SB-LED, Руководство по установке

Страница: 14 / 24

14
INSTALLATION GUIDE WWW.SB-RAILING.COM
4.2.3 Expansion joint
Always take the following precaution with an expansion joint to avoid damage to the liniLED® LED strip. This applies to
both glued and brazed handrails.
The handrail can be joined using a coupling with one loose joint (steps 1 and 2), or it can be terminated with an end
cap (step 3). Regardless of whether the handrail is continuous or is terminated by an end cap, the LED strip must be
interrupted at an expansion joint.
For information about fitting and cutting the LED strip, see section 4.3.
Terminating the handrail with a coupling
1
Apply glue to one end of the coupling.
Fit the coupling for the stainless steel handrail
between two handrail sections.
2
Ensure that there is enough free play between
the handrail and the coupling to allow for expansion
and contraction due to temperature changes in the
building structure.
Finishing the handrail with end caps
3
Insert the end caps in the ends of
the handrail sections.