11
Operation Manual Fire Lighter Revision 2
Pre-flight Safety Check List
Ground Effect Fire Lighters should receive a strict pre-flight inspection on every component according to the checklist
below before each flight, to ensure the safety and the quality of the operation.
Prior to testing or operation of the Ground Effect Fire Lighter, conduct a pre-operational briefing with the pilot and all
crew members. Safety, communications, responsibilities, operational procedures, hazard identification, and the
emergency response plan must be reviewed.
No.
Frame and Hopper
Check
Remarks
1
Check all fastenings on the valve, ensure all are tight.
2
Check the hopper is in good condition
3
Check that there are no cracks in the frame
4
Check Lift Cleats for cracks and any damage
No.
Fuel Pump and Hoses
Check
Remarks
6
Check hoses and fittings for mechanical damage causing leakage
7
Ensure all fittings are secure
8
Check Fuel Pump motor mount fastenings are tight and Fuel Pump is secure
to motor
No.
Wiring
Check
Remarks
9
Inspect the wiring for mechanical damage or lose connections
10 Check the black plastic cable glands are tight on the Control Enclosure
11 Check the electrical connector by the spreader bar on Lift Lines.
No.
Operation
Check
Remarks
13 Ensure that the breather line is clear and has no kinks or obstructions
14 Check the Filler Cap is secure once filled and the seal is in place.
15 Inspect Lift Lines, Lift Line connections points and Spreader Bar
16 Check the Discharge valve is clear and there is a gap between igniter probes
!
The pilot is responsible for determining the flight speed according to the load, line length and acknowledging the
weather conditions