© Copyright 2011 IMS Company. All rights reserved.
An ISO 9001:2008 Registered Quality Company
4
E
D
HEX BOLT
1
/
4
''
-20 x
5
/
8
''
1
/
4
''
-20
HEX NUT
1
/
4
''
LOCKING
WASHER
1
/
4
''
FLAT
WASHER
drawing 2
Rear
Holes
Hanger
Posts
Frame and Shelf Assembly
4. Flip base onto casters
5. DO NOT OVER TIGHTEN ANY BOLTS UNTIL ALL ASSEMBLY
IS COMPLETE – the “looser” bolts will allow easier assembly
of subsequent shelves.
6. Find Holes in lip of Base – 2 holes on lip on one half
of the base – attach right and left Front Support w/Hangers
to the middle holes of the Base. Position Hanger Posts
so they point away from rear holes (
image D
).
Attach using ¼''-20 x
5
/
8
'' Hex Head Bolt, ¼'' Flat Washer,
¼'' Locking Washer, & ¼''-20 Hex Nut (
see drawing 2 & image E
).
