Imron Corporation 15375 Barranca Pkwy, Suite B-106
Irvine, CA 92618 Phone 949-341-0947 Fax 949-341-0949
INTEGRATED SYSTEM 2000
SI-16 INPUT PROCESSOR
System Control Processor
7. Specification:
The sub-controller is for use in low voltage, class 2 circuit only.
Primary power:
(DC or AC)
DC input:
12Vdc±10%, 350mA
AC input:
12Vac±15%, 500mA RMS
Relay Contacts:
2 form C, 5A 28Vdc, Resistive.
Inputs:
16 supervised, EOL 1,000 OHM/1,000 OHM standard
2 non-supervised
Wire requirement:
Power:
1 twisted pair, 18 AWG
RS-485:
24AWG, 4,000ft (1,200m) max., twisted pair(s) with shield.
Alarm input:
1 twisted pair, 30 ohms max.
Output:
As required for the load
Environmental:
Temperature: 0 to 70 °C, operating
-55 to +85 °C, storage
Humidity:
0 to 95% RHNC
Mechanical:
Dimension:
6 in. (152mm) W x 8 in. (203mm) L x 1 in. (25mm) H
Weight:
10 oz (290 gm) nominal
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
