Imron Corporation 15375 Barranca Pkwy, Suite B-106
Irvine, CA 92618 Phone 949-341-0947 Fax 949-341-0949
INTEGRATED SYSTEM 2000
SI-16 INPUT PROCESSOR
System Control Processor
4. Alarm Inputs Wiring:
Inputs 1 to 16 may be configured to use or not to use End of Line (EOL) resistors and to use normally
open or normally closed contacts. Input CT and input BA are typically used for monitoring cabinet tamper
and power failure respectively. These two inputs are for contact closure monitoring only, and do not use
EOL resistor(s).
5. Relay Outputs:
The following show typical use of the relay outputs. DC source is recommended whenever it is possible.
Transient clamping must be provided to protect the contact and to reduce EMI emission. Use sufficiently
large wires for the load current to avoid voltage loss.
