7 / 13 www.imrelax.com
◆
STROBE:
range for 0 to 255;
2.3.5 ADVA-->Advanced: Set light run parameter
Enter the page as shown in Picture 10, set the parameter of light:
Picture 11 page of run parameter
◆
Pan Invert
:
Reverse PAN move
OFF--> Pan Normal move.(
Default
)
ON--> Reverse PAN move.
◆
Tilt Invert:
Reverse TILT move
OFF--> Tilt Normal move.(
Default
)
ON--> Reverse Tilt move.
◆
P/T Rectify: Disable or enable position rectify function.
OFF--> Disable P/T rectify
ON--> Enable P/T rectify-(
Default
)
◆
Pan Offset:
Set PAN original position.
Default: 10
◆
Tilt Offset:
Set TILT original position.
Default: 10
◆
Lamp when:
PowerON--> Turn on the lamp when power on.(
Default
)
RstDone--> Turn on the lamp after reset.
Manual--> Manually turn on the lamp.
◆
Data hold:
OFF--> When no DMX signal,return to middle position.(
Default
)
ON--> When no DMX signal,stop in the final position.
◆
Factory Setting:
Restore all parameter to factory setting.
2.3.6 STAT-->Status: View status
Enter the page as shown in Picture 12:
Picture 12 page of status
◆
Work Mode:
Show the current working mode.
