background image

  1 / 13    www.imrelax.com 

Installation and attention   

1.1    Maintenance 

l

 

To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. 

l

 

Intermittently using will extend this item

s service life. 

l

 

Please clear the fan ,fan net , and optical lens in order to keep good work state. 

l

 

Do not use the alcohol or any other organic solvent to wipe the shell. 

1.2    Statement 

The product has perfect performance and integrity packing. All users should be strictly complying with the warning 
and  operating  instructions  as  stated.  Or  we  aren

t  in  charge  of  any  result  by  misusing.  Any  damage  resulting  by 

misuse is not within the Company

s warranty. Any fault or problem caused by neglecting the manual is also not in 

the charge of dealers. 
     

Note:

 All information is subject to change without prior notice. 

1.3    Safety Precaution 

l

 

In  order  to  guarantee  the  product

s  life,  please  don

t  put  it  in  the  damp  places  or  even  the  environment  over 

60degress. 

l

 

Always mount this unit in safe and stable matter. 

l

 

Install or dismantle should operate by professional engineer. 

l

 

Using lamp

the change rate of power voltage should be within

±

10%

If the voltage is too high

it will shorten the 

light

s life; If it

s not enough, will influence the effect. 

l

 

Please restart it 20 minutes later after turning off light , until full-cooling. Frequent switching will reduce the life 

span of lamps and bulbs; intermittent using will improve the life of bulbs and lamps. 

l

 

In order to make sure the product is used well, please read the Manual carefully. 

1.4   

Specification

 

1. Voltage: AC100-240V,50-60Hz 
2. Full load Power: 350W 
3. Light source: Original Philips 250W MSD Silver Bulb 
4. Channel: 16/18 DMX channel 
5. Lens optical system: Super Powerful, 400,000+ Lux in 10 meters!     
6. Pan: 540  fine 
7. Tilt: 270 fine 
8. Dimmer: 0-100% smooth linear dimmer 
9. Strobe: 1-25 Hz with pulse effect 
10. Color Wheel: 14  open, with 6 color rainbow effect wheel; 
11. Gobo Wheel: 13 gobos + open 
12. Prism one: 8 facet prism; 
13. Prism two: 46 facet prism; 
14. Prism overlapping: 8+46 facet prism available 
15. Display: Touch Screen display, can adjust 180 degree to fit different installation position 
16. Control: DMX/Master-slave/Auto/Sound activated 
17. Product Size:38

×

40

×

53cm 

18. Packing Size: 40*42*55cm 
19. N.W: 18kg 
20. G.W: 19kg 
14. With Powercon IN and OUT 
 
 

Содержание IM-MH250














Отзывы: