3.5 Master/Slave fixture linking
1. Connect the (male) 3 pin connector side of the DMX cable to the output
(female) 3pin connector of the first fixture.
2. Connect the end of the cable coming from the first fixture which will have a
(female) 3 pin connector to the input connector of the next fixture consisting of
a (male) 3 pin connector. Then, proceed to connect from the output as stated
above to the input of the following fixture and so on.
3.6 orientations
This fixture may be mounted in any position provided there is adequate room
for ventilation.
4. Operating instructions
4.1 Description of operation panel
4.2 Menu map
Menu
Setting
Run mode
DMX
Sound control mode
Perform 1
Perform 2
Perform 3
Perform 4
Random mode
DMX address
1-512
Channel mode
16 channel
20 channel
up
menu
enter
menu
down
DMX
ERR
