Before the first time to use it, Please check whether the damage in transit, if
happen damages in transit, please do not use this lamp, and please asap
contact distributors or manufacturers.
Please don't install the lamp in the ordinary combustible material on the
surface. Lamp should be installed in the well ventilated place, and the distance
of the wall to keep it over 10 cm, at the same time, please check the fan hole
was clear.
Do not use lamp direct project in flammable objects, lamp and the radiation
of the distance between the objects please keep it over 12 m.
Do not use direct lamp project light source , to avoid damage the eyes.
Before installation, please make sure your use power supply voltage and
marked voltage
Note: before any install, maintain and clean lamp, please confirm cut off the
power supply.
2. Introduction
2.1 Features
Power 180W
16/20 channel DMX-512 .
Pan :540
°
/tilt:270
°
.
Variable electronic strobe.
Variable electronic dimmer (0-100%).
Beam angle:13.5
°
LCD display
Reset to factory settings option.
Pan/tilt inverts option.
Fan cooled.
2.2 DMX channel
CHANNEL
CHANNEL MODE
16
20
1
COLOUR WHEEL
COLOUR WHEEL
2
STROBE
STROBE
3
DIMMER
DIMMER
4
GOBO WHEEL
GOBO WHEEL
5
PRISM INSERTION
PRISM INSERTION
6
PRISM ROTATION
PRISM ROTATION
7
RESERVER
RESERVER
8
RESERVER
RESERVER
9
FOCUS
FOCUS
10
PAN
PAN
11
PAN FINE
PAN FINE
12
TILT
TILT
13
TILT FINE
TILT FINE
