Environmental Equipment, Inc.
IMR 1050X
www.imrusa.com
3634 Central Ave. St. Petersburg, Fl 33711 * Phone 727-328-2818 * 800-RING-IMR * Fax 727-328-2826
Email:
Page 5 of 21
Quick Start Guide
Getting Started
1.
Turn Power on in area of fresh air and allow to count down
2.
Rotate test selector to Fuel. Press UP or DOWN arrow to scroll and select desired fuel. Top line is selected
fuel
3.
Connect flue probe thermocouple connector to T1, and connect flue probe to water trap as shown above.
Use optional probe with T2 for inlet temperature.
Gas Zero
1.
Rotate test selector to Menu.
2.
Press
UP
Button to GAS ZERO and press ENTER.
3.
Make sure Analyzer is in fresh air and press ENTER.
4.
Analyzer will then Zero. This takes 90 seconds
BASIC CO/COMBUSTION ANALYSIS
1 2 3
1 2 3 4
1 2 3 4 5
