IMR® 2800
20
IMR Environmental Equipment, Inc.
Editing the fuel parameters for the special fuel type has to be done in the submenu
"organization".
3.4 MEASUREMENT MENU
Measurement
- Put the gas sampling probe into the flue gas and check for the highest temperature. Lock the
probe tube with the cone at this point.
- The sensors need approximately 3 minutes for an accurate and stable reading.
The measurement menu shows all measured and calculated parameters as well as the fuel
type.
The first line scrolls automatically every 10 seconds. However one value can be selected by
using the "^" and /or "
v
" button.
CO2 0.0%
T-gas 75.2oF O2 20.9%
CO ppm NO ppm SO2ppm
0 0 0
The first line shows these different values:
CO2, T-room, losses, excess air, fuel type
Active buttons
Scroll first line
^ ,
v
Print measurement
P
Store measurement
M
Line feed
F
Enter main menu
