XDB300-0-0-GB-04
December 2007
Page 5
Mounting the Drop Box
CAUTION:
Make certain that you mount the Drop Box on a vibration-free
surface.
NOTE:
The Drop Box can be mounted against virtually any surface, including metal,
a maximum of 25 mm (0.98 in) thick.
XDB902-1-0-GB-XX
Mount the Drop Box against the side of a counter taking into consideration any security
issues, accessibility, routing of wires and visibility of the
“Diagnostic Indicators”. The
Front Mouth Plate is mounted on the outside of the counter and the Throat Assembly is
mounted on the inside of the counter.
CAUTION:
Make allowance, during installation, for the Tag Retention Box.
Ensure that the Tag Retention Box does NOT restrict the Tags from
dropping out of the Drop Box.
Figure 2: Sequence of Assembly
1.
Mark out, drill and cut according to the indications on the Mechanical Drilling and
Cutting Template.
2.
Connect the Drop Box as per Figure 4.
3.
Place the Front Mouth Plate into position, using the Locating Pins on the back of
the Front Mouth Plate for correct location.
4.
Slide the Throat Assembly from inside the counter onto the two Locating Pins, and
tighten using the Wing Nuts supplied.
