Impex MARCY PLATINUM MP-3100, Руководство пользователя

Страница: 19 / 24

STEP 10 (See Diagram 10)
A.) Attach the Leg Developer (#32) to the open bracket on the front of Main Seat
Support (#28). Secure it with one M10 x 3 1/8” Allen Bolt (#81), two Ø ¾” Washers
(#101), and one M10 Aircraft Nut (#98). Do not over tighten the Nut and Bolt. Make
sure the Leg Developer is able to swivel.
B.) Insert the U-shaped Lock Pin (#37) into the tube in the front of Main Seat Support.
Secure it with one Spring (#80), Ø ½” Washer (#79), and M6 x ½” Philips Screw
(#95).
C.) Insert three Foam Tubes (#36) halfway through the holes on the Main Seat Support
and Leg Developer. Push six Foam Rolls (#76) onto the Tubes from both ends.
Plug six Foam Roll End Caps (#61) into the Tubes from both ends.
D.) Attach an Olympic Sleeve (#48) onto the weight post on the Leg Developer. Attach a
Spring Clip (#50) to the Olympic Sleeve.
E.) Attach a Curl Bar Holder (#35) to the Leg Developer. Secure it with a L-shaped Pin
(#77).
DIAGRAM 10
18