background image

 
 
 
 

TABLE OF CONTENTS 

 
BEFORE YOU BEGIN...............................................................................................1 

 

IMPORTANT SAFETY NOTICE................................................................................2 
HARDWARE PACK……............................................................................................4 
ASSEMBLY INSTRUCTIONS....................................................................................5 
EXPLODED DIAGRAM..............................................................................................10 
PARTS LIST..........................................................................................................….11 
WARRANTY..........................................................................................................….12 
ORDERING PARTS...............................................................................................….12 

 
 
 
 
 
 

BEFORE  YOU  BEGIN 

 

Thank you for selecting the MARCY CLASSIC MCB-346 COMBO BENCH 
by IMPEX

®

 INC.  For your safety and benefit, read this manual carefully 

before using the machine.   As a manufacturer, we are committed to 
provide you complete customer satisfaction.  If you have any questions, 
or find there are missing or damaged parts, we guarantee you complete 
satisfaction through direct assistance from our factory.  To avoid 
unnecessary delays, 

please call our  TOLL-FREE customer service 

number.  

Our Customer Service Agents will provide immediate 

assistance to you. 

 

 

 

 
 

 

Toll-Free Customer Service Number       

1-800-999-8899 

Mon. - Fri.  9 a.m. - 5 p.m.  PST 

www.impex-fitness.com 

[email protected] 

 

Содержание MARCY MCB-346














Отзывы: