Impex MARCY DIAMOND ELITE MD-3401 Скачать руководство пользователя страница 29

 
 

IMPEX

®

 INC. 

 

LIMITED WARRANTY 

 

IMPEX Inc. ("IMPEX

®

") warrants this product to be free from defects in workmanship and material, under normal use 

and service conditions, for a period of two years on the Frame from the date of purchase.   This warranty extends 
only to the original purchaser.   IMPEX's obligation under this Warranty is limited to replacing or repairing, at 
IMPEX's option. 
 
All returns must be pre-authorized by IMPEX.  Pre-authorization may be obtained by calling IMPEX Customer 
Service Department at 1-800-999-8899. All freights for products return to IMPEX must be prepaid by the customer.  
This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, 
abuse, misuse, improper or abnormal usage or repairs.  No other warranty beyond that specifically set forth above is 
authorized by IMPEX. 
 
IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in connection with 
the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of 
revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or 
whatsoever natures.   Some states do not allow the exclusion or limitation of incidental or consequential damages.  
Accordingly, the above limitation may not apply to you. 
 
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of 
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.  
Some states do not allow limitations on how long an implied warranty lasts.   Accordingly, the above limitation may 
not apply to you. 
 
This warranty gives you specific legal right.   You may also have other rights which vary from state to state. 

Register on-line www.impex-fitness.com

 

 

IMPEX

®

 INC. 

2801 S. Towne Ave. 
Pomona, CA  91766 

 
ORDERING REPLACEMENT PARTS 

 
Replacement parts can be ordered by calling our Customer Service Department toll-free at 

1-800-999-8899

 during 

our regular business hours:  Monday through Friday, 9 am until 5 pm Pacific standard time. 

[email protected] 

 
When ordering replacement parts, always give the following information. 
 
1. Model 
2.  Description of Parts 
3. Part Number 
4.  Date of Purchase 

 
 
 
 
 

28 

Содержание MARCY DIAMOND ELITE MD-3401






























Отзывы: