IMPETUS 1A 6800 am, Руководство пользователя

Страница: 17 / 24

IA6800/impetus
KEY FUNCTION:
ITEM DESCRIPTION
‧
Setting selection.
Up
Increase resistance level.
‧
‧
Setting selection.
Down
Decrease resistance level.
‧
ENTER
‧
Confirm setting or selection.
‧
Hold on pressing for 2 seconds, computer will reboot.
‧
Clear setting value. Reset
‧
Reverse to main menu after finish a workout.
Start/ Stop Start or Stop rowing training.
‧
Recovery
‧
Test heart rate recovery status.
OPERATION PROCEDURE
1. POWER ON
Plug in power supply ( or press RESET key 2 s ), computer will power on and display all segments
on LCD for 2 seconds ( Picture 1). Then come to program selecting Mode.
Picture 1
2. POWER OFF
No any signal (sensor, keyboard or pulse) is transmitted into monitor for 4 minutes, LCD will be off
and servomotor goes back to 0 scale, system stop. All setting and calculated value will be saved,
continue the data. next training will
3. Function selection
In program selecting mode, MANUAL is flashing in LCD upward in 1Hz. Press UP or DOWN button
to select: Manual-->Program-->H.R.C.-->Race-->User , and confirm by pressing ENTER.
4 . Manual Mode
4 .1 Press START / STOP key in main menu may start rowing directly in Manual mode.
4.2 Press UP or DOWN to select Manual mode and press ENTER to confirm ( Picture 2).
4.3 Press UP or DOWN to set target value of TIME / DISTANCE , CALORIES , PULSE , press ENTER to
confirm. ( Time and DISTANCE can ' t be preset at the same time .)
4.4 Press START/STOP key to start rowing (Picture 3) . The set value starts counting down from
target value. Press UP or DOWN to adjust resistance level from 1~16.
14