Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019
Page
88
of
123
Rev 1.0
exposure defaults to the Exposure settings specified in the
Acquisition control parameters
AecExposureMin
Sets the minimum exposure time value in microseconds.
AecExposureMax
Sets the maximum exposure time value in microseconds.
AgcAecLuminanceLevel
Sets the desired luminance level to be maintained during AGC or
AEC or both assuming 12-bits per pixel.
AgcAecLuminanceType
Sets how the luminance target is calculated in AGC or AEC. Options
are Average or Peak.
AgcAecSpeed
Sets speed AEC/AGC tracking speed. 4x is fastest, 1x is slowest.
4.7.6.2 Status Settings
AgcGainCurrentValue
Shows current status of digital gain value calculated in AGC mode
in dB.
AgcGainCurrentValueRaw
Shows current status of digital gain value calculated in AGC mode
in RAW units.
AgcMinLimitReached
Shows status of whether minimum digital gain limit was reached
while in AGC mode.
AgcMaxLimitReached
Shows status of whether maximum digital gain limit was reached
while in AGC mode.
AecExposureCurrentValue
Shows status of exposure value in microseconds, calculated by
the camera in AEC mode.
AecMinLimitReached
Shows status of whether the minimum exposure limit was
reached during AEC mode.
AecMaxLimitReached
Shows status of whether the maximum exposure limit was
reached during AEC mode.
CurrentAvgOrPeakLuminance
Shows the current status of average or peak luminance.
AgcAecStatus
Internal camera use