Scanner Instructions
1. Scan Barcodes (Add Items to Memory)
Aim the scanner at a barcode. Press and hold the Scan Button until
you hear a beep and the blinking green LED turns solid green. To
order more than one box scan barcode again.
2. Delete Barcodes (Remove an Item from Memory)
To delete a single item, aim the scanner at a barcode. Press and hold
the Delete Button until you hear a beep and the blinking amber LED
turns solid amber.
3. Clear the Memory (Remove All Items from Memory)
Use the Delete Button to clear the ScanTel
®
IM2001 memory of all
stored items. Aim the scanner away from any barcodes. Press and
hold the Delete Button for 6 seconds, until you hear a long unique
beep tone.
4. Connecting the Scanner to your Computer
To connect the communication cable to the computer:
1. Connect the USB cable to the USB port on your computer.
2. Slide the connector into the data communication
jack on the side of the scanner.
5. Send Collected Barcode Data to the Computer
To transfer barcode data from the ScanTel
®
IM2001 to the computer:
1. Make sure the cable connection between the ScanTel
®
IM 2001
Scanner and the computer is secure.
2. Use your Imperial WebPush software to upload stored data from
the ScanTel
®
IM2001 to your computer. When communications
starts, the green LED blinks and the scanner beeps.
3. Please see page 6 for more ordering instructions.
WebPush Instructions
Software Requirements
•
PC or compatible with 32 MB RAM minimum.
•
Windows 95, 98, NT, 2000, XP, or Vista.
•
Internet Explorer ActiveX control must be available on the PC.
•
One available USB port.
•
1 MB of free hard disk space.
•
HTTP Internet access from the installation PC
•
If a firewall or proxy server is used for Internet access (see your
network administrator), you will need support from your Network
Administrator to properly configure the application. Imperial is
not capable of supporting setup of proxy access to the Internet.
Installation:
1. Connect the USB cable to your PC computer. There are usually
one or two USB ports on a computer.
2. Install the WebPush application on your PC computer.
3. When prompted at the end of installation, select the checkbox for
“Run the program now”.
4. There is a setup dialog box available from the File Menu, Options.
In this dialog you can select your COM port that the scanner is
connected to, and enter any proxy information you may need to
connect to the Internet. You can also enter your Imperial web site
login information if you don’t want to type it in when clicking a
link in the program.
4
5
