![background image](http://html1.mh-extra.com/html/imperial/is1900bp/is1900bp_installation-instructions-manual_2048797004.webp)
Island Installation Details Cont:
3. Stack Support Frame Preparation:
The Model Hood being installed will
always determine the support frame
size required; 10 3/4”, 15 3/4” or
22 3/4” Wide and 10 3/4” Deep.
At the proper ceiling location install
upright 2 x 4 cross framing between
ceiling joists. The location to be on
center, side to side the overall width
of the support structure selected: 10
3/4”, 15 3/4”, 22 3/4”.
Allow electrical wiring and vent
pipe to extend below ceiling line.
Finish the ceiling surface as
required marking the location of the
cross framing (or backing) beneath.
4.
Installing the Support Frame:
Secure the support frame to the ceiling with six #8
wood screws, 2 1/2” long, using the pre drilled
holes located in the two support brackets.
Check the frame to sure it is vertically plumb, in
both directions, and correctly positioned above the
cooking surface. The frame may be adjusted to
allow for some ceiling imperfections by using the
four adjusting screws in the elongated holes located
on the two mounting brackets.
Now install four #10 x 5/8” screws in the pre
drilled fixed bracket holes “Locking” the support
structure in position
.
Содержание IS1900BP
Страница 10: ......