3
Be sure the electrical service is adequate for the model you have chosen. This information can be found
on the serial plate, which is located on the side of the cabinet and behind the grille.
Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is
important. The power cord is equipped with a three-prong grounding plug for protection against shock
hazards.
Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend
to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified
electrician install the proper receptacle.
Ensure the receptacle is accessible after the unit installation.
WARNING
For your safety
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove
any prong from the power cord.
WARNING
Electrical Information
IDENTIFICATION OF PARTS
Accessories
Check
that
all the accessories are included in the package and please refer to the installation
instructions for their usage.
PARTS:
PART NAME
S
:
QUANTITY:
1 set
Exhaust hose and A
d
aptor
I and Adaptor B
Window Slider Kit and bolt
(diagram not to scale)
Foam seal
and adhesive foam seal
2
pc
s
.
TEMP
AUTO
COO
L
DR
Y
HEAT
FA
N
HIG
H
MED
LOW
MODE
FA
N SPEED
SWING
TIMER ON
ECONOMY
ON/O
FF
TI
MER OFF
RESE
T
LO
CK
SET TEMPERATURE(
F
)
L
ED
DISPLAY
Remote Controller and
Batter
ies
(2x AAA)
1
pc
.
Drain hose( ) and drain hose adaptor( )
1
pc
.
All the illustrations in this manual are for explanation purpose only. Your air
conditioner
's actual shape
may be slightly different.
NOTE:
NOTE: Optional parts( ), some models without.
