IMPACT SUBSEA
INNOVATIVE UNDERWATER PRODUCTS
www.impactsubsea.com
Document No:
0000.1913 |
Version No:
1.2 | 23
rd
April 2020
8
4.0 Hardware Setup
For use by a diver, please follow section 4.1 to setup the system. If installing to an ROV, please
follow section 4.2
4.1 Diver Deployed System
Step 1:
Unpack All Items from Transport Case
Step 2:
Connect ISA500 Probe To Cable Reel:
•
Ensure Cable Reel Probe connector is lightly greased with supplied grease
•
Push Cable Reel Probe Connector through protective holder
•
Push Cable Reel Probe Connector onto Probe connector
•
Secure in place with red locking collar (hand tighten only)
Step 3:
Slide Probe Into Protective Holder:
•
Align Probe flats with Holder flats
•
Gently slide the Probe backwards into Holder
•
Lock the Probe in place using 'Locking Bolt' (supplied with system)
Step 4:
Connector Topside Interface Box:
•
Connect topside mating end of cable reel to 'ISA500' Port
•
Connect USB Cable to 'USB' Port. Connect other end of USB cable to
PC
•
Connect Power Supply cable to 'PWR' port
The ISFMD system is now physically connected and ready for operation.
