IMPACT SUBSEA
INNOVATIVE UNDERWATER PRODUCTS
www.impactsubsea.com
Document No:
0000.1913 |
Version No:
1.2 | 23
rd
April 2020
18
7.0 Servicing
The ISFMD system is a highly robust measurement device. The system has been
designed to
require minimal maintenance, and as such there are no user serviceable components within the
system.
The ISA500 probe should be rinsed in fresh water after each use to remove salt deposits. If
required a light detergent (such as that used to clean household dishes) can be used.
DO NOT USE SOLVENTS TO CLEAN THE UNIT
Following rinsing the unit should be dried with a cloth.
The connector should be cleaned, and a light coating of Molykote 44 Medium
grease should
be applied.
The unit should be stored in its original case, in a cool, dry place.
It is recommended that the unit be returned to Impact Subsea Ltd, on an annual
basis to have
a health check and service conducted.
