4
Precautions
•
DANGER: high-voltage parts inside.
•
There are no serviceable parts inside the unit. Only qualified service engineers
should access the inside of the casing.
•
If the flash tube or modeling light becomes cracked or damaged in any way,
replace immediately.
•
Keep this product away from water and any flammable gases or liquids.
•
Use only the correct, recommended voltage.
•
Avoid rapid, high-power flashing.
•
Excessive heat shortens the life span of flash tubes, modeling lamps, and internal
components.
•
If the unit is not used for two months, turn it on for 30 minutes, and fire the flash
several times to charge the capacitors.
•
Always remove the protective cap before plugging in or powering on the unit.
•
Never operate the flash with the protective cap on.
•
Make sure this product is powered off when plugging it into a power source.
•
Turn off the power and unplug the power cord from the unit and wall when the
monolight is not in use.
•
Always remove the modeling lamp and attach the protective cap when transporting
the unit.
•
Do not attempt to disassemble or repair this product. There are components inside
that can produce a hazardous electric shock.
•
Handle this product with care.
•
Do not stare at the lights when they are powered on.
•
Clean this product with only a soft, dry cloth.
•
Always wear cotton gloves when handling the flashtube.
•
Keep this product away from children.
•
Make sure everything is secure before proceeding.
•
Make sure that this product is intact and that there are no missing parts before use.
•
All images are for illustrative purposes only.
Содержание VC-500WL2KN
Страница 1: ...INSTRUCTIONS VC 500WLN Digital Monolight...
