5
Assembly
Assembling the Frame
1. Use the pole connectors to fit the four H1 and four H2
rods together.
1
2. Form a box of two D and two W rods
with the corner connectors.
2
3. Put the four H1/H2 assemblies into the four corners.
3
4. Tip the frame on its side, and complete the frame with
the two remaining D and W rods.
4
H1
H2
H1
H1
H1
H1
H2
H2
H2
H2
D
D
D
D
W
W
W
W
Completing the Booth
1. Lay the frame on its side, so the width sections are on the top and bottom.
2. Pull the shell over the frame until the frame is centered beneath the shell.
5
3. Zip the four corners closed.
6
4. Pull the corners over the frame, and attach the side panels to the top and bottom panels with
the touch-fastener strips.
7
Note:
You may need to readjust each corner to ensure a snug fit.
5. Stand the booth upright, making sure that the panels with the logo are on top.
W
D
1
5
6
7
2
3
4
