ON•OFF
POWER
PROFESSIONAL
ON•OFF
POWER
PROFESSIONAL
ON•OFF
POWER
PROFESSIONAL
Connect the
appropriate power
cable to either the
LiteTrek 4.0, a
portable flash
unit, or both.
Page 4
Page 5
10M
25M
50M
75M
100M
10Y
25Y
50Y
75Y
100Y
Charging Instructions
Operating Instructions
Impact LiteTrek 4.0
Portable Flash
1
Connect the other
end of the power
cable to the Mini
LT Power Module.
The power cable
must be plugged in
securely or the unit
will not turn on.
Outlet B is for portable flashes
Outlet A is for the LiteTrek 4.0
2
Press the power
button to turn on.
The battery gauge
will take a moment
to calibrate. Turn
on the power to
your LiteTrek 4.0
and/or portable
flash unit.
Press once to turn on.
Press again to turn off.
The battery gauge indicates
power remaining (75% shown).
3
ON•OFF
POWER
PROFESSIONAL
Disconnect any flash units
or cables connected to the
power module. Battery may be
charged with or without the
power module attached.
Connect the charger into an
AC wall socket (110-240V).
Plug adapters can be used to
connect to worldwide power
outlets. A voltage converter
should not be used.
Connect the charger to the
charger input socket on the
power module.
The charging status is indicated
on the charger with an LED
light. Red indicates charging,
while green indicates that
charging is complete.
1
3
2
FULL
CHARGING
4
Do not interrupt the charging process. Doing so may affect the accuracy of the battery gauge.
DO NOT EDIT
OR REVISE ARTWORK
We will not approve any artwork
which has been altered by the vendor
FORWARD YOUR PROOFS
FOR APPROVAL
BEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION
WITHOUT PRIOR APPROVAL OF PROOFS
Содержание MLTPBP
Страница 1: ...TM impact Mini LT Power Pack INSTRUCTIONS...
