impact MLTPBP, Инструкция по эксплуатации

Страница: 3 / 8

Page 6 Page 3
10M 25M 50M 75M 100M 10Y 25Y 50Y 75Y 100Y
Overview Specifications and Troubleshooting
Battery Gauge Top View
Side View
*Number of flashes varies according to charge state, temperature, and maintenance
ON•OFF
POWER
PR
OFESSIONAL
Power Switch
Protective Caps
Charger Input
Power Module
Swappable
Battery Pack
Power/Indicator LED
Power Outlet B
CZ, CKE tap for most portable flashes
Power Outlet A
For Impact LiteTrek 4.0 Monolight
Specifications
Battery Type Rechargeable Lithium Ion
Power Output 325V
Power Input 12V (only use Impact LiteTrek chargers)
Current 7.2A
Charging Time
Approximately 4 hours
Flashes per Full Charge* 650 (full power); 3500 (1/64 power)
Recycle Time 1-3.5 seconds
Fuse 40A
Troubleshooting
The battery pack includes overheat protection, which will automatically shut off function if
the device reaches a temperature of 158°F (70°C). In the event that this happens, switch off
the power module (if connected) and wait until the unit has had time to cool.
Symptom Solution
The power cable is plugged in,
but the power indicator on the
power module does not illuminate.
The power module shuts down after
being turned on, even though the
battery is fully charged.
Verify that the cables are not damaged,
are securely connected, and are the
correct cables for the flash in use.
Make certain that the battery pack
is securely seated into the power
module.
DO NOT EDIT
OR REVISE ARTWORK
We will not approve any artwork
which has been altered by the vendor
FORWARD YOUR PROOFS
to mabel.li@asia.bhphotovideo.com
FOR APPROVAL
BEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION
WITHOUT PRIOR APPROVAL OF PROOFS